Here we have a BMW 640D gran coupe that came in for our stage 1 CustomPro ecu software. It is common to see these cars not making what the factory claims on the stock software, however this is totally normal. We always see good figures on these engines that are…
Read more...
Here we have this beautiful 2018 BMW X5M that came to us for a stage 1 CustomPro remap. As you can see from the graph attached, when this vehicle came in, it was actually producing almost 40hp less than the book figures suggested. This means that the peak figures weren't…
Read more...
Audi S3 in for our increasingly popular stage 1 CustomPro ECU & TCU software package, and to also have a Ramair open intake and turbo elbow supplied and fitted from us. This is what we call the perfect stage 1 package, as the Ramair system beautifully compliments our software. As…
Read more...
Here we have a Jaguar XE with the 180hp 2.0 diesel engine, in for a stage 1 remap. As you can see from the graph attached, this vehicle saw horsepower and torque gains from very early in the rev range, which then continued right up to the rev limiter, while…
Read more...
Here we have a manual Mini Cooper JCW F56 that came to us for a stage 1 CustomPro tune. With this vehicle being a manual, we did not push it too much in an attempt to protect the clutch as much as possible. We kept the power delivery as linear…
Read more...
Here we have another 2.0tdci Ford Transit in for our stage 1 software, with this one in particular being a 130hp variant. As usual with these vehicles, they always see fantastic increases on our software, and this van was certainly no different! From just over 1,800rpm onwards, the performance has…
Read more...
Here we have a Peugeot 208gti that came in for our stage 1 software. As you can see from the graph attached, this car saw horsepower and torque increases starting from as early as 1,350rpm, which then continued in a consistent and linear fashion up to just below 5,400rpm. From…
Read more...
DAZA powered Audi RS3 in for our stage 1 CustomPro ECU software, after being previously tuned elsewhere by a cheaper alternative. This car came to us after being told by the previous tuner that there was an issue with the vehicle. On the previous tune, the car had the following…
Read more...
Audi A5 with the 245hp 3.0tdi engine in with us for a stage 1 tune. This car produced way more than the stock software suggested, however we knew there was still some room for improvement. From just below 2,000 rpm onwards, this car saw consistent horsepower and torque increases throughout…
Read more...
Here we have an OPF equipped Seat Leon Cupra 290 that came to us for our stage 1 CustomPro software! This particular vehicle already had an MST turbo elbow and intake pipe paired up with a Pipercross air filter, which all complement our software nicely. With this car having an…
Read more...