Blog

SEAT LEON CUPRA 290 STAGE 1 ECU AND TCU CUSTOMPRO SOFTWARE

SEAT LEON CUPRA 290 STAGE 1 ECU AND TCU CUSTOMPRO SOFTWARE

Here we have a Seat Leon Cupra 290 that came to us for a CustomPro stage 1 ECU and TCU software package! Here at Performance Centre we love working with cars that have this engine, as they are fantastic to tune. The Leon Cupra's are a brilliant all round package,…

Read more...
SEAT LEON CUPRA 280 CUSTOMPRO STAGE 2 ECU & TCU SOFTWARE PACKAGE

SEAT LEON CUPRA 280 CUSTOMPRO STAGE 2 ECU & TCU SOFTWARE PACKAGE

Here we have a Seat Leon Cupra 280 that came in for our CustomPro Stage 2 ECU & TCU software package.  As you can see, this car came into us having already been tuned elsewhere, however the owner wasn't 100% happy with the way the vehicle performed on the road,…

Read more...
SEAT LEON 1.5TSI 130HP STAGE 1 CUSTOMPRO REMAP

SEAT LEON 1.5TSI 130HP STAGE 1 CUSTOMPRO REMAP

Here we have a Seat Leon with the 130hp 1.5TSI engine in with us for a stage 1 tune. This car was unfortunately on a factory software version that has quite intrusive torque monitoring settings in the higher rpm, which is why we had to pull this back up top,…

Read more...
OPF EQUIPPED SEAT LEON CUPRA 290 STAGE 1 CUSTOMPRO REMAP

OPF EQUIPPED SEAT LEON CUPRA 290 STAGE 1 CUSTOMPRO REMAP

Here we have an OPF equipped Seat Leon Cupra 290 that came to us for our stage 1 CustomPro software! This particular vehicle already had an MST turbo elbow and intake pipe paired up with a Pipercross air filter, which all complement our software nicely. With this car having an…

Read more...
SEAT IBIZA CUPRA STAGE 1 CUSTOMPRO REMAP

SEAT IBIZA CUPRA STAGE 1 CUSTOMPRO REMAP

Seat Ibiza Cupra with the 192hp 1.8TSI engine (the same engine found in the 6C VW Polo GTI) in for stage 1 software, to go nicely with the Revo intake that was already fitted on the vehicle. From 2,100rpm onwards, this is now a completely different car. As you can…

Read more...
SEAT LEON 2.0TDI 184HP CUSTOMPRO REMAP

SEAT LEON 2.0TDI 184HP CUSTOMPRO REMAP

Seat Leon with the 2.0tdi 184hp cr engine in for stage 1 tuning. Similarly to the cars we have tuned in the past with this engine, we saw some great increases throughout the rev range in terms of power and torque, with gains starting from very early in the rpm…

Read more...
SEAT LEON CUPRA 290 STAGE 1 STAFF CAR SHOWING VARIOUS HARDWARE EFFECTS

SEAT LEON CUPRA 290 STAGE 1 STAFF CAR SHOWING VARIOUS HARDWARE EFFECTS

Here we have one of our staff Seat Leon Cupra's, that belongs to one of our dyno operators. This pre opf 290 is running the exact same stage 1 tune in every one of the tuned pulls on the graph below. However, the graph shows the effect that different hardware…

Read more...
SEAT LEON 2.0TDI 184HP STAGE 1 CUSTOMPRO REMAP

SEAT LEON 2.0TDI 184HP STAGE 1 CUSTOMPRO REMAP

Seat Leon with the 184hp 2.0tdi engine in for a CustomPro stage 1 ecu remap. These cars always see linear and consistent gains in the horsepower and torque department, while retaining the drivability that the factory software offered. This vehicle in particular saw increases starting from 1,700rpm onwards. Before: 176hp/385nmAfter: 214hp/477nmOf…

Read more...
SEAT LEON 1.6TDI 105HP CUSTOMPRO ECU REMAP

SEAT LEON 1.6TDI 105HP CUSTOMPRO ECU REMAP

Seat Leon with the 105hp 1.6TDI engine in for stage 1 CustomPro software. We saw increased horsepower and torque figures from very early on in the revs, which continued for the remainder of the range. As you can see, we saw smooth and consistent gains starting at 1,700rpm that followed…

Read more...
SEAT LEON 1.4TSI 140HP CUSTOMPRO ECU REMAP

SEAT LEON 1.4TSI 140HP CUSTOMPRO ECU REMAP

Seat Leon with the 1.4TSI 140hp engine in for stage 1 CustomPro software. Despite the fact this vehicle made a lot more on the stock software than the factory claimed (140hp/250nm) we still managed to see some fantastic power and torque gains using our software. From 1,900rpm onwards, this vehicle…

Read more...