Mk3 leon in for a Stage 1 remap, this time a 184bhp 2.0 diesel With the car being a manual we carefully calibrated the torque from 1800-2700rpm to bring power in gradually and retain the reliability of the clutch, which in turn keeps EGT (exhaust gas temperatures) lower and allowing more…
Read more...
Audi A3 in for a stage 1 tune in Saturday with the 2.0 150hp diesel engine. Seeing increased levels of power and torque from 1,600rpm and continuing to make more than the stock software for the remainder of the rev range.Before: 159hp/350nmAfter: 189hp/440nmIf you would like more information on what…
Read more...
BMW 330D touring that came in for stage 1 software. As usual with these cars and the majority of diesel BMW’s, this car tuned fantastically and saw a great improvement in power and torque while retaining that silky smooth delivery.Before: 256hp/559nmAfter: 310hp/675nmIf you would like more information on what we…
Read more...
BMW 420D. This car also gained a good amount while retaining the smooth delivery, similar to the car in the previous post. While also managing to hold on to peak power for longer at the top end of the rev range too when compared to the stock software.Before: 186hp/400nmAfter: 225hp/479nmIf…
Read more...
BMW 325d in with us to have a CustomPro ECU tune after the owner wanted a bit more oomph. This car was already tuned by another company but that didn’t stop us from improving the car, meaning it left us with an additional 10hp (at peak) and 71nm.Before: 252hp/523nmAfter: 262hp/594nmIf…
Read more...
8P Audi S3 in for Stage 2 CustomPro ECU software. Seeing consistent power and torque gains that follow the power delivery that the stock software had after the initial increase at just over 3,000rpm.Before(with hardware): 275hp/350nmAfter: 343hp/453nmIf you would like more information on what we can do to your vehicle,…
Read more...
BMW 520D in for stage 1 tuning. Seeing a good increase in power while retaining the smooth characteristic that the original software had. Leaving us with an additional 34hp and 70nm.Before: 179hp/390nmAfter: 213hp/460nmIf you would like more information on what we can do to your vehicle, message us by using…
Read more...
Porsche 911 GTS with the 3.0T equipped with a manual transmission.Making pretty much exactly what it was supposed to on the stock software at 442hp and 545nm, we set to work making a CustomPro stage 1 tune for the vehicle and the results spoke for themselves. The car left us with…
Read more...
Citroen Berlingo in for a stage 1 tune this afternoon! This vehicle came to us after having a bad experience with a generic flash remap from another company that caused issues. After having the old tune took off and coming to us, we tuned the vehicle using our own in…
Read more...
Mercedes E220 in for stage 1 tuning. Producing some great figures on our software, holding over 200hp from 3,200rpm onwards while also providing a torque gain of over 100nm and retaining the power curve that the factory software had.Before: 178hp/397nmAfter: 209hp/508nmIf you would like more information on what we can…
Read more...